Products
MS Serrated Flats

K.M Steel & supplies a wide range of Mild Steel (MS) Serrated Flats. MS Serrated Flats are used for manufacturing of Industrial Gratings.

Size in mm Average Weight
KG/MTR KG/FT
25 x 5 0.98 0.30
25 x 6 1.18 0.40
30 x 5 1.18 0.40
30 x 6 1.40 0.40
32 x 5 1.26 0.40
32 x 6 1.50 0.50
38 x 5 1.50 0.50
40 x 5 1.57 0.50
40 x 6 1.90 0.60
40 x 8 2.44 0.74
50 x 5 1.96 0.60
50 x 6 2.36 0.70
Rolling Tolerances
Width
Thickness
Sectional weight
Length
up to 50 mm: ± 1 mm 50 mm to 75 mm: ± 1.5 mm 75 mm to 100 mm: ± 2 mm 100 mm and above ± 2% and maximum not exceding 6 mm
up to 12 mm: ± 0.5 mm over 12 mm: 4% and max not exceeding 1.5 mm
Up to 3 mm thick: +5/-3% Over 3 mm : ± 5%
For fixed length : ± 100 mm

Chemical compositions & Mechanical properties

The data given above is indicative. Actual weights may vary.

K.M Steel & INDUSTRIES developes specific sections. Specific sizes in any section can be developed for economical and feasible quantity, in Mild Steel, High Tensile, En 8 / En 8D / EN 9 / EN 16 material.